Network & Data Wiring
Cat6/Cat6A drops to every workstation, AP and device, certified and labeled.
One insured team for every low-voltage system in your building — data cabling, security cameras, access control and fiber — installed, certified and documented by our own crews.
Low voltage is everything in your building that carries data or signal instead of line power: network cabling, security cameras, access control, fiber, wireless access points and POS wiring. Most businesses hire a different vendor for each one and end up owning the gaps between them. Stratos Group installs all of it with one insured, bilingual crew — so the cable, the camera and the card reader are one accountable project.
Cat6/Cat6A drops to every workstation, AP and device, certified and labeled.
The cabling and power behind cameras, readers, strikes and door hardware.
Cabling for wireless access points and every payment terminal.
Pre-wire before drywall, plus moves, adds and changes as you grow.
Tap the solution you care about to see the detail.
The backbone of every other low-voltage system is the cable underneath it. We install Cat6 and Cat6A drops to workstations, access points, printers and devices, terminate them at a properly built rack, and certify every run with test reports you keep.
WHAT THIS INCLUDES:
Cameras and door hardware fail most often because of how they were wired, not the device itself. We run dedicated PoE cable to every camera, pull the wiring for readers, magnetic locks and request-to-exit devices, and protect pathways so a forklift or a ceiling job does not take the system down.
WHAT THIS INCLUDES:
Wireless coverage and payment uptime both depend on where the cable lands. We place and wire access points from a coverage plan rather than convenience, and run dedicated cabling to each POS station and back-office system so payments never share a lane with guest traffic.
WHAT THIS INCLUDES:
Pre-wiring during construction costs a fraction of retrofitting later, and we coordinate directly with general contractors to hit their schedule. Once you are operating, moves, adds and changes are handled the same way — documented, labeled and without leaving abandoned cable in the ceiling.
WHAT THIS INCLUDES:
Clean cabling, cameras and access for multi-suite offices.
Long runs, high ceilings and yard coverage engineered properly.
POS wiring, guest Wi-Fi and loss-prevention cameras.
Quiet, compliant installs planned around patient hours.
We walk the building, map pathways and count real drops — no guessing from a floor plan.
You get a documented design and a fixed price scheduled around your operations.
Our own crews install, test, label and hand over full documentation.
Low voltage covers every system in your building that carries data or signal rather than line power: structured network cabling, security cameras, access control, fiber optic backbones, wireless access points, POS wiring and the pathways that protect all of it. In Texas this work sits apart from electrical, and it demands different skills — certification testing, network design and an understanding of how these systems talk to each other.
Most businesses discover the problem the same way: the cabling contractor blames the camera vendor, the camera vendor blames the network, and nobody owns the outcome. Because we install and support all of it, there is a single insured, bilingual team accountable from the cable to the card reader.
Every handoff between vendors costs you: a second trip charge, a re-pull because someone ran the wrong cable, a camera that will not reach the recorder because nobody planned the distance. When one team plans the cabling, the cameras, the access control and the network together, those failures simply do not happen — and the install finishes in fewer visits.
It also makes support dramatically simpler. One number to call, one team that already knows your building, and documentation that covers every system instead of four partial sets nobody can reconcile.
The main factors are drop count, ceiling height and type, pathway access, distances involved, whether the building is occupied, and how much existing cable can be reused. New construction is cheapest because the walls are open; an occupied retrofit costs more because access is harder and work is sequenced around your hours. Fiber, camera count and door hardware each add their own scope. Costs vary by building — we quote a fixed price after a free on-site survey rather than a per-drop average that changes on installation day.
We work as a low voltage contractor across the Houston metro from our base in Katy: Houston, Sugar Land, The Woodlands, Pearland, Cypress, Spring, Conroe and Pasadena — single suites through multi-building campuses, plus multi-site rollouts for businesses with several locations.
Low voltage covers the systems in your building that carry data or signal rather than line power: network cabling, security cameras, access control, fiber, wireless access points and POS wiring. We install, certify, document and support all of it with our own insured crews.
We are insured, and our technicians are certified in the systems we install, with every cabling run tested and certified to TIA/EIA standards. We are happy to provide insurance documentation for your project or landlord.
Yes — that is the point of hiring one low voltage contractor. Planning them together avoids the distance, power and pathway mistakes that happen when separate vendors each solve half the problem.
Yes. Pre-wiring before drywall is the most cost-effective moment to cable a building, and we coordinate directly with GCs to hit the construction schedule.
It depends on drop count, ceiling height, pathway access, distances and whether the space is occupied. We survey the site free and quote a fixed price, so the number reflects your actual building rather than an average.
We've been working with Stratos Group for more than 10 years, and they've been a reliable partner throughout that time. They helped us set up our server infrastructure and have continued to support us with IT issues, network management, and day-to-day technical needs. Whenever something comes up, their team is responsive and works quickly to get us back up and running.What I appreciate most is that they take the time to understand our business and provide practical solutions instead of just quick fixes. Having a dependable IT team gives us confidence that our systems are secure and functioning properly.If you're looking for an IT company that is knowledgeable, responsive, and easy to work with, I would recommend giving Stratos Group a call.Fernando Campos CEO, Kennedy & Campos Associates
Fernando CamposVery happy with work they did. Very professional. Attention to details. They are always concern about customer needs and customer satisfaction. Thank you so much for a great work!Max
Max MachadoOur engineers will evaluate your needs and present a clear solution with transparent pricing — no obligation, no pressure.
(281) 207-0775